Mechanisms of the Drug Penetration Enhancer Propylene Glycol Interacting with Skin Lipid Membranes.

Very few drugs have the necessary physicochemical properties to cross the skin's main permeability barrier, the stratum corneum (SC), in sufficient amounts. Propylene glycol (PG) is a chemical penetration enhancer that could be included in topical formulations in order to overcome the barrier properties of the skin and facilitate the transport of drugs across it. Experiments have demonstrated that PG increases the mobility and disorder of SC lipids and may extract cholesterol from the SC, but little is known about the molecular mechanisms of drug permeation enhancement by PG. In this work, we have performed molecular dynamics (MD) simulations to investigate the molecular-level effects of PG on the structure and properties of model SC lipid bilayers. The model bilayers were simulated in the presence of PG concentrations over the range of 0-100% w/w PG, using both an all-atom and a united atom force field. PG was found to localize in the hydrophilic headgroup regions at the bilayer interface, to occupy the lipid-water hydrogen-bonding sites, and to slightly increase lipid tail disorder in a concentration-dependent manner. We showed with MD simulation that PG enhances the permeation of small molecules such as water by interacting with the bilayer interface; the results of our study may be used to guide the design of formulations for transdermal drug delivery with enhanced skin permeation, as well as topical formulations and cosmetic products.

QbD Based Formulation Development and Optimisation of Ozenoxacin Topical Nano-Emulgel and Efficacy Evaluation Using Impetigo Mice Model.

To formulate and optimize Ozenoxacin nano-emulsion using Quality by Design (QbD) concept by means of Box-Behnken Design (BBD) and converting it to a gel to form Ozenoxacin nano-emulgel followed by physico-chemical, in-vitro, ex-vivo and in-vivo evaluation. This study demonstrates the application of QbD methodology for the development and optimization of an effective topical nanoemulgel formulation for the treatment of Impetigo focusing on the selection of appropriate excipients, optimization of formulation and process variables, and characterization of critical quality attributes. BBD was used to study the effect of "% of oil, % of Smix and homogenization speed" on critical quality attributes "globule size and % entrapment efficiency" for the optimisation of Ozenoxacin Nano-emulsion. Ozenoxacin loaded nano-emulgel was characterized for "description, identification, pH, specific gravity, amplitude sweep, viscosity, assay, organic impurities, antimicrobial effectiveness testing, in-vitro release testing, ex-vivo permeation testing, skin retention and in-vivo anti-bacterial activity". In-vitro release and ex-vivo permeation, skin retention and in-vivo anti-bacterial activity were found to be significantly (p < 0.01) higher for the nano-emulgel formulation compared to the innovator formulation (OZANEX™). Antimicrobial effectiveness testing was performed and found that even at 70% label claim of benzoic acid is effective to inhibit microbial growth in the drug product. The systematic application of QbD principles facilitated the successful development and optimization of a Ozenoxacin Nano-Emulsion. Optimised Ozenoxacin Nano-Emulgel can be considered as an effective alternative and found to be stable at least for 6 months at 40 °C / 75% RH and 30 °C / 75% RH.

Combining topical dermal infused exosomes with injected calcium hydroxylapatite for enhanced tissue biostimulation.

BACKGROUND: Exosome research continues to flourish. Subsequent knowledge surrounding indications, dose-response, safety, efficacy, and the ability to combine exosome treatment as a "skin primer"-for biostimulation modalities such as calcium hydroxylapatite (CaHA), platelet-rich plasma (PRP), and platelet-rich fibrin matrix (PRFM) is growing rapidly. The objective of this study was to develop safe, reproducible methods of improving topical exosome absorption to enhance the quality of skin either by themselves, or in combination with injectable CaHA. METHODS: Under IRB Approval (International Cell Surgical Society: ICSS-2022-007), 40 patients were enrolled in this study. Twenty patients underwent facial biostimulatory dermal infusion alone, to determine if this method allowed adequate exosome absorption. Five patients underwent facial biostimulatory infusion followed immediately by Dilute CaHA injection (1:1 dilution) to the face. Five patients underwent exosome biostimulatory dermal infusion followed immediately by hyperdilute CaHA (dilution 1:4) injection to the neck. Five patients underwent Facial Dilute CaHA injection (1:1 dilution) alone, without dermal infusion. Five patients underwent neck hyperdilute CaHA injection (1:4 dilution) alone, without dermal infusion. All patients had pretreatment Quantificare 3-D photo-documentation and skin analysis (Quantificare, France). In all patients, the skin was first cleansed with a gentle glycolic acid facial wash (Gregory MD). To induce a "homing inflammatory environment" for the exosomes, sea salt exfoliation was performed (SaltFacial®, SaltMed, Cardiff, CA). A nitric oxide-generating serum (N101 Pneuma Nitric Oxide, Austin, TX) was then applied to act as an enhanced vehicle for absorption. A 3 MHz ultrasound (SaltFacial®, SaltMed, Cardiff, CA) was then utilized to further deepen the absorption of the nitric oxide serum. A topical emulsion containing equal volumes (1.0 cc containing 1 million) of exosomes (Kimera Labs, Miramar, FL), 25 units of botulinum toxin (Xeomin, Merz Aesthetics, Raleigh, NC) and hyaluronic acid (Belatero, Merz Aesthetics, Raleigh, NC) was mixed via back-and-forth propulsion in a 3-cc syringe. When adequately mixed, the emulsion was then applied to the treatment areas. The cavitating ultrasound was then used to aid in the absorption of the emulsion. The patients were then treated with high-intensity LED therapy (SaltFacial®, SaltMed, Cardiff, CA), utilizing the collagen restoration preset program of combination red (660 nm) near-infrared (930 nm) wavelength for 20 min. Post-treatment Quantificare analysis was performed at 15 and 30 days after treatment. RESULTS: Without exception, all dermal infusion alone and CaHA injection alone patients showed an improvement in the tone, quality, and texture of their skin. Quantificare results showed consistent improvement in wrinkles, pores, skin evenness, improved vascularity, and a reduction in oiliness and unwanted pigment. When employed as a skin primer prior to injections (CaHA), enhanced and more rapid results were seen. CONCLUSIONS: Biostimulatory dermal infusion can be achieved utilizing topical placental mesenchymal stem cell-derived exosomes. These exosomes can be used alone, or mixed with ancillary ingredients such as botulinum toxin, hyaluronic acid dermal filler, and CaHA to customize and personalize treatments based upon individual patient needs. Topical absorption is enhanced with sea salt exfoliation, a topical nitric oxide-generating serum, and 3 MHz cavitating ultrasound. Post-absorption activity is enhanced with high-intensity LED treatment. The addition of CaHA injections after the topical exosome "priming of the skin" yielded enhanced skin quality faster than exosomes or CaHA alone.

Olive oil and clove oil-based nanoemulsion for topical delivery of terbinafine hydrochloride: in vitro and ex vivo evaluation.

In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96-98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.

Pistacia lentiscus L. Distilled Leaves as a Potential Cosmeceutical Ingredient: Phytochemical Characterization, Transdermal Diffusion, and Anti-Elastase and Anti-Tyrosinase Activities.

The present work was performed to investigate the phenolic composition of P. lentiscus L. distilled leaves (PDL) and examine its potential against certain key enzymes related to skin aging. High-pressure liquid chromatography coupled to mass spectrometry (HPLC-MS) and various separation procedures combined with nuclear magnetic resonance (NMR) and MS analysis were performed to isolate and identify compounds present in the ethyl acetate extract (EAE) of PDL. A high amount of flavonol glycoside was detected in EAE. Indeed, quercetin-3-O-rhamnoside (FC), myricetin-3-O-rhamnoside (FM2), and kaempferol-3-O-rhamnoside (FB2) were isolated from EAE, and are present in high quantities of 10.47 ± 0.26, 12.17 ± 0.74, and 4.53 ± 0.59 mg/g dry weight, respectively. A transdermal diffusion study was carried out to determine the EAE-molecules that may transmit the cutaneous barrier and showed that FM2 transmits the membrane barrier with a high amount followed by FC. EAE, FM2, and FC were tested against tyrosinase and elastase enzymes. Moreover, intracellular tyrosinase inhibition and cytotoxicity on skin melanoma cells (B16) were evaluated. The results indicated that EAE, FC, and FM2 have important inhibitory activities compared to the well-known standards, at non-cytotoxic concentrations. Therefore, they could be excellent agents for treating skin pigmentation and elasticity problems.

Combination anesthetic therapy: co-delivery of ropivacaine and meloxicam using transcriptional transactivator peptide modified nanostructured lipid carriers in vitro and in vivo.

Combination therapy combining two drugs in one modified drug delivery system is used to achieve synergistic analgesic effect, and bring effective control of pain management, especially postoperative pain management. In the present study, a combination of drug delivery technologies was utilized. Transcriptional transactivator (TAT) peptide modified, transdermal nanocarriers were designed to co-deliver ropivacaine (RVC) and meloxicam (MLX) and anticipated to achieve longer analgesic effect and lower side effect. TAT modified nanostructured lipid carriers (TAT-NLCs) were used to co-deliver RVC and MLX. RVC and MLX co-loaded TAT-NLCs (TAT-NLCs-RVC/MLX) were evaluated through in vitro skin permeation and in vivo treatment studies. NLCs-RVC/MLX showed uniform and spherical morphology, with a size of 133.4 ± 4.6 nm and a zeta potential of 20.6 ± 1.8 mV. The results illustrated the anesthetic pain relief ability of the present constructed system was significantly improved by the TAT modification through the enhanced skin permeation efficiency and the co-delivery of MLX along with RVC that improved pain management by reducing inflammation at the injured area. This study provides an efficient and facile method for preparing TAT-NLCs-RVC/MLX as a promising system to achieve synergistic analgesic effect.

Preparation of topical bimatoprost with enhanced skin infiltration and in vivo hair regrowth efficacy in androgenic alopecia.

To prepare a topical formulation of bimatoprost (BIM) with high skin permeability, we designed a solvent mixture system composed of ethanol, diethylene glycol monoethyl ether, cyclomethicone, and butylated hydroxyanisole, serving as a volatile solvent, nonvolatile co-solvent, spreading agent, and antioxidant, respectively. The ideal topical BIM formulation (BIM-TF#5) exhibited 4.60-fold higher human skin flux and a 529% increase in dermal drug deposition compared to BIM in ethanol. In addition, compared to the other formulations, BIM-TF#5 maximally activated human dermal papilla cell proliferation at a concentration of 5 µM BIM, equivalent to 10 µM minoxidil. Moreover, BIM-TF#5 (0.3% [w/w] BIM) significantly promoted hair regrowth in the androgenic alopecia mouse model and increased the area covered by hair at 10 days by 585% compared to the vehicle-treated mice, indicating that entire telogen area transitioned into the anagen phase. Furthermore, at day 14, the hair weight of mice treated with BIM-TF#5 (5% [w/w] BIM) was 8.45- and 1.30-fold greater than in the 5% (w/w) BIM in ethanol and 5% (w/v) minoxidil treated groups, respectively. In the histological examination, the number and diameter of hair follicles in the deep subcutis were significantly increased in the BIM-TF#5 (0.3 or 5% [w/w] BIM)-treated mice compared to the mice treated with vehicle or 5% (w/w) BIM in ethanol. Thus, our findings suggest that BIM-TF#5 is an effective formulation to treat scalp alopecia, as part of a novel therapeutic approach involving direct prostamide F2α receptor-mediated stimulation of dermal papilla cells within hair follicles.

Epilobium angustifolium L. Essential Oil-Biological Activity and Enhancement of the Skin Penetration of Drugs-In Vitro Study.

Epilobium angustifolium L. is a popular medicinal plant found in many regions of the world. This plant contains small amounts of essential oil whose composition and properties have not been extensively investigated. There are few reports in the literature on the antioxidant and antifungal properties of this essential oil and the possibility of applying it as a potential promoter of the skin penetration of drugs. The essential oil was obtained by distillation using a Clavenger type apparatus. The chemical composition was analyzed by the GC-MS method. The major active compounds of E. angustifolium L. essential oil (EOEa) were terpenes, including α-caryophyllene oxide, eucalyptol, ß-linalool, camphor, (S)-carvone, and ß-caryophyllene. The analyzed essential oil was also characterized by antioxidant activity amounting to 78% RSA (Radical Scavenging Activity). Antifungal activity against the strains Aspergillus niger, A. ochraceus, A. parasiticum, and Penicillium cyclopium was also determined. The largest inhibition zone was observed for strains from the Aspergillus group. The EOEa enhanced the percutaneous penetration of ibuprofen and lidocaine. After a 24 h test, the content of terpene in the skin and the acceptor fluid was examined. It has been shown that the main compounds contained in the essential oil do not penetrate through the skin, but accumulate in it. Additionally, FTIR-ATR analysis showed a disturbance of the stratum corneum (SC) lipids caused by the essential oil application. Due to its rich composition and high biological activity, EOEa may be a potential candidate to be applied, for example, in the pharmaceutical or cosmetic industries. Moreover, due to the reaction of the essential oil components with SC lipids, the EOEa could be an effective permeation enhancer of topically applied hydrophilic and lipophilic drugs.

Hybrid chitosan-lipid nanoparticles of green tea extract as natural anti-cellulite agent with superior in vivo potency: full synthesis and analysis.

The aim of this work is to exploit the advantages of chitosan (CS) as a nanocarrier for delivery of anti-cellulite drug, green tea extract (GTE), into subcutaneous adipose tissue. Primarily, analysis of herbal extract was conducted via newly developed and validated UPLC method. Ionic gelation method was adopted in the preparation of nanoparticles where the effect lecithin was investigated resulting in the formation of hybrid lipid-chitosan nanoparticles. Optimal formula showed a particle size of 292.6 ± 8.98 nm, polydispersity index of 0.253 ± 0.02, zeta potential of 41.03 ± 0.503 mV and an entrapment efficiency percent of 68.4 ± 1.88%. Successful interaction between CS, sodium tripolyphosphate (TPP) and lecithin was confirmed by Fourier-transform infrared spectroscopy, differential scanning calorimetry and X-ray diffraction. Morphological examination was done using transmission electron microscope and scanning electron microscope confirmed spherical uniform nature of GTE load CS-TPP nanoparticles. Ex vivo permeation study revealed permeability enhancing activity of the selected optimal formula due to higher GTE deposition in skin in comparison to GTE solution. Moreover in vivo study done on female albino Wistar rats carried out for 21 days proved successful potential anti-cellulite activity upon its application on rats' skin. Histological examination showed significant reduction of adipocyte perimeter and area and fat layer thickness. Results of the current study demonstrated that the developed GTE-loaded CS-TPP nanoparticle comprised of chitosan and lecithin showed permeability enhancing activity along with the proven lipolytic effect of green tea represent a promising delivery system for anti-cellulite activity.

O/W microemulsion droplets diffuse through hydrogel network to achieve enhanced transdermal drug delivery.

To overcome the poor water solubility of total flavones of Arisaematis rhizoma, microemulsions (MEs) can be used as a carrier for transdermal administration to promote their solubilization and skin permeability. Here, we investigated the physical compatibility of MEs in hydrogels and their skin permeation-enhancing effects. Transparency of microemulsion-based hydrogels (MBGs) was analyzed to evaluate ME compatibility with different hydrogel matrices. Transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy were used to explore the microstructures of MBGs and ME-hydrogel combinations. Uniform and transparent MBG was obtained by adding 1% sodium hyaluronate (SH) to the optimized ME. MBG prepared with SH as a matrix expressed pseudoplastic-fluid and shear-thinning characteristics, making it easy to apply in clinical settings. No new FTIR peak occurred in the MBG compared with ME and hydrogel matrix, indicating a physical combination of ME and the polymer network gel. Nanoscale droplets of ME migrated in the gel network, and the migration capacity and in vitro transdermal permeation flux negatively correlated with SH concentration in the gel system. In conclusion, in MBGs, ME can keep nanoscale droplets migrating in the hydrogel network, thereby enhancing transdermal drug delivery.

The use of optical differential scanning calorimetry to investigate ibuprofen miscibility in polymeric films for topical drug delivery.

Understanding drug miscibility in pharmaceutically relevant systems is essential for the development and optimisation of pharmaceutical dosage forms. This is particularly true for film forming systems which are designed to become supersaturated with drug, following application on the skin surface, whilst maintaining the physical stability of the drug for a suitable period to enhance drug delivery. For such formulations, chemical penetration enhancers as well as the drug are absorbed from the formulation into the skin, making understanding drug delivery from the films challenging. This study investigated the use of an optical differential scanning calorimetry (DSC) to understand drug miscibility in polymeric film forming systems and explain drug transport behaviour from film forming formulations, containing ibuprofen, a copolymer based on dimethylaminoethyl methacrylate, butyl methacrylate, and methyl methacrylate (Eudragit® E, EuE), a copolymer based on ethyl acrylate, methyl methacrylate and methacrylic acid ester with quaternary ammonium groups (Eudragit® RS, EuRS) and a copolymer based on methacrylic acid and methyl methacrylate (Eudragit® S, EuS), with and without the chemical penetration enhancer propylene glycol, across a model membrane. The optical DSC enabled the rapid screening of not only drug-polymer miscibility, but also drug-vehicle miscibility, while considering both the melting-point depression and melting enthalpy of the drug due to the presence of the polymer/polymer-based vehicle, obtained via thermal analysis by structural characterisation (TASC) and DSC analysis, respectively. The results obtained enable the polymers studied to be ranked in the order of EuE > EuRS > EuS, with EuE being more miscible with ibuprofen, and the incorporation of a penetration enhancer in the film forming system formulation was found to increase ibuprofen solubility in EuE- and EuRS- based films. The drug-polymer/vehicle miscibility information obtained via optical DSC provided understanding of drug transport from film forming systems with the higher miscibility of ibuprofen with EuE reducing drug transport through decreasing drug saturation in the film. The higher drug transport from films containing EuRS and EuS could also be linked to drug miscibility with the polymer and showed dependence on ibuprofen loading in the formulation. Overall optical DSC has been demonstrated to be a valuable tool for determining drug-vehicle miscibility for pharmaceutical product development.

Topical gel based nanoparticles for the controlled release of oleanolic acid: design and in vivo characterization of a cubic liquid crystalline anti-inflammatory drug.

BACKGROUND: Oleanolic acid (OA) has multiple pharmaceutical applications including anti-inflammatory activity, but low permeability of the molecule limits its widespread use. METHODS: A cubic liquid crystalline nanoparticle (LCNP)-based gel was prepared as a potential topical delivery system for OA. The LCNP-based gel was optimized using rheological, drug release kinetic, and ex vivo permeation studies. RESULTS: The studies showed that the OA was trapped in the interior of the LCNP with a crystal form of Pn3m space. The optimized LCNP formulation performed well using in vitro release studies for up to 12 h (85.49 ± 0.21%). Ex vivo permeation studies showed that the LCNP-based gel formulation was superior to a standard gel formulation. The r2 value from the Peppas equation indicated good linearity, but showed irregular (non-Fickian) diffusion, suggesting that drug release was controlled by multiple processes. CONCLUSIONS: In this study, OA-loaded LCNPs were prepared by the precursor method, resulting in a well-characterized OA-LCNP gel preparation. The gel was shown to be effective in a rodent carrageenan-induced hind paw inflammation model with sustained efficacy after a single application.

An overview on the advantages and limitations of 3D printing of microneedles.

The use of 3D printing (3DP) technology, which has been continuously evolving since the 1980s, has recently become common in healthcare services. The introduction of 3DP into the pharmaceutical industry particularly aims at the development of patient-centered dosage forms based on structure design. It is still a new research direction with potential to create the targeted release of drug delivery systems in freeform geometries. Although the use of 3DP technology for solid oral dosage forms is more preferable, studies on transdermal applications of the technology are also increasing. Microneedle sequences are one of the transdermal drug delivery (TDD) methods which are used to bypass the minimally invasive stratum corneum with novel delivery methods for small molecule drugs and vaccines. Microneedle arrays have advantages over many traditional methods. It is attractive with features such as ease of application, controlled release of active substances and patient compliance. Recently, 3D printers have been used for the production of microneedle patches. After giving a brief overview of 3DP technology, this article includes the materials necessary for the preparation of microneedles and microneedle patches specifically for penetration enhancement, preparation methods, quality parameters, and their application to TDD. In addition, the applicability of 3D microneedles in the pharmaceutical industry has been evaluated.

Improvement of Skin Permeation of Caffeine, a Hydrophilic Drug, by the Application of Water Droplets Provided by a Novel Humidifier Device.

Recently, a novel humidifier that sprays water fine droplets equipped with a copolymer, poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) (PEDOT/PSS) was developed. PEDOT/PSS in the humidifier absorbs water from the environment and releases fine water droplets by heating. In the present study, the effect of hydration on the skin barrier, stratum corneum, was first determined by the application of fine water droplets using the humidifier. The skin-penetration enhancement effect of a model hydrophilic drug, caffeine, was also investigated using the humidifier and compared with a conventional water-evaporative humidifier. More prolonged skin hydration effect was observed after application of the fine water droplet release humidifier using PEDOT/PSS than that using a conventional humidifier. In addition, markedly higher skin permeation of caffeine was observed in both infinite and finite dose conditions. Furthermore, higher skin permeation of caffeine from oil/water emulsion containing caffeine was observed in finite dose conditions by pretreatment with the humidifier using PEDOT/PSS. This device can provide water droplets without replenishing water, so it is more convenient for enhancing the skin permeation of chemical compounds from topical drugs and cosmetic formulations.

Effect of Rubbing Application on the Skin Permeation of Active Ingredients from Lotion and Cream.

Effect of rubbing application on the skin permeation of a hydrophilic drug caffeine (CAF) and lipophilic drug rhododendrol (RD) from lotion and cream were investigated. Skin permeation of CAF was markedly increased by rubbing action independent of the formulation type. In addition, the skin penetration-enhancement effect was affected by the rubbing direction: rubbing application against the direction of hair growth showed the highest permeation compared with rubbing applications along the direction of hair growth and in a circular pattern on the skin. On the other hand, no enhancement effect was observed by the rubbing actions on the skin permeation of RD, regardless of formulation type. Change in the infundibula orifice size of hair follicles by the rubbing and following skin stretching may be related to the higher skin permeation for CAF. In contrast, high RD distribution into the stratum corneum may be a reason why no enhancement effect was observed by the rubbing action. These results can be helpful to predict safety and effectiveness of topically applied formulations.

Permeation, stability and acute dermal irritation of miroestrol and deoxymiroestrol from Pueraria candollei var. mirifica crude extract loaded transdermal gels.

In this study, permeation behaviors and chemical stability of miroestrol and deoxymiroestrol from Pueraria candollei var. mirifica (PM), Thai traditional medicine, crude extract containing transdermal gels were firstly evaluated. Three different PM extract containing gels were formulated, including hydroalcoholic and microemulsion gels using carbomer, and silicone gel using silicone elastomer. In vitro permeation through porcine ear skin demonstrated that the flux and 24 h cumulative permeation of miroestrol and deoxymiroestrol were in the order of hydroalcoholic > silicone > microemulsion gels. Hydroalcoholic gel provided the highest partition coefficient from gel onto skin, and thus the skin permeability coefficient. After 24 h permeation, no miroestrol and deoxymiroestrol remained deposited in the skin. Accelerated study using heating-cooling revealed insignificant difference between the remaining percentages of miroestrol and deoxymiroestrol in aqueous and non-aqueous based gels. Long-term stability study showed that miroestrol contents remained constant for 90 d and 30 d under 5 ± 3 °C and 30 ± 2 °C, 75 ± 5%RH, respectively; whereas the percentage of deoxymiroestrol decreased significantly after 30 d storage, irrespective of storage conditions. Acute dermal irritation test on New Zealand White rabbits showed that PM hydroalcoholic gels were non-irritant, with no signs of erythema or oedema.[Figure: see text].

Characterizing Cutaneous Drug Delivery Using Open-Flow Microperfusion and Mass Spectrometry Imaging.

Traditionally, cutaneous drug delivery is studied by skin accumulation or skin permeation, while alternative techniques may enable the interactions between the drug and the skin to be studied in more detail. Time-resolved skin profiling for pharmacokinetic monitoring of two Janus Kinase (JAK) inhibitors, tofacitinib and LEO 37319A, was performed using dermal open-flow microperfusion (dOFM) for sampling of perfusate in an ex vivo and in vivo setup in pig skin. Additionally, matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI-MSI) was performed to investigate depth-resolved skin distributions at defined time points ex vivo in human skin. By dOFM, higher skin concentrations were observed for tofacitinib compared to LEO 37319A, which was supported by the lower molecular weight, higher solubility, lipophilicity, and degree of protein binding. Using MALDI-MSI, the two compounds were observed to show different skin distributions, which was interpreted to be caused by the difference in the ability of the two molecules to interact with the skin compartments. In conclusion, the techniques assessed time- and depth-resolved skin concentrations and were able to show differences in the pharmacokinetic profiles of two JAK inhibitors. Thus, evidence shows that the two techniques can be used as complementary methods to support decision making in drug development.

Thymoquinone Loaded Topical Nanoemulgel for Wound Healing: Formulation Design and In-Vivo Evaluation.

Thymoquinone is a natural bioactive with significant therapeutic activity against multiple ailments including wound healing. The poor aqueous solubility and low skin permeability limit its therapeutic efficacy. The present investigation aimed to improve the biopharmaceutical attributes of thymoquinone to enhance its topical efficacy in wound healing. A nanoemulsion-based hydrogel system was designed and characterized as a nanotechnology-mediated drug delivery approach to improve the therapeutic efficacy of thymoquinone, utilizing a high-energy emulsification technique. The black seed oil, as a natural home of thymoquinone, was utilized to improve the drug loading capacity of the developed nanoemulsion system and reduced the oil droplet size to <100 nm through ultrasonication. The influence of formulation composition, and the ultrasonication process conditions, were investigated on the mean globule size and polydispersity index of the generated nanoemulsion. Irrespective of surfactant/co-surfactant ratio and % concentration of surfactant/co-surfactant mixture, the ultrasonication time had a significant (p < 0.05) influence on the mean droplet size and polydispersity index of the generated nanoemulsion. The developed nanoemulgel system of thymoquinone demonstrated the pseudoplastic behavior with thixotropic properties, and this behavior is desirable for topical application. The nanoemulgel system of thymoquinone exhibited significant enhancement (p < 0.05) in skin penetrability and deposition characteristics after topical administration compared to the conventional hydrogel system. The developed nanoemulgel system of thymoquinone exhibited quicker and early healing in wounded Wistar rats compared to the conventional hydrogel of thymoquinone, while showing comparable healing efficacy with respect to marketed silver sulfadiazine (1%) cream. Furthermore, histopathology analysis of animals treated with a developed formulation system demonstrated the formation of the thick epidermal layer, papillary dermis along with the presence of extensive and organized collagen fibers in newly healed tissues. The outcome of this investigation signifies that topical delivery of thymoquinone through nanoemulgel system is a promising candidate which accelerates the process of wound healing in preclinical study.

Tailoring of Retinyl Palmitate-Based Ethosomal Hydrogel as a Novel Nanoplatform for Acne Vulgaris Management: Fabrication, Optimization, and Clinical Evaluation Employing a Split-Face Comparative Study.

AIM: Retinyl palmitate (RP), the most stable vitamin A derivative, is used to treat photoaging and other skin disorders. The need to minimize the adverse effects of topical drug administration has led to an enhanced interest in loading RP on ethosomes for topical drug delivery. The aim of the current study was to prepare and compare the performance of RP decorated ethosomal hydrogel with tretinoin cream in the treatment of acne vulgaris as an approach to improve drug efficacy and decrease its side effects. METHODS: RP-loaded ethosomes were prepared using the injection sonication technique. A Box-Behnken design using Design Expert® software was used for the optimization of formulation variables. Particle size, zeta potential (ZP), entrapment efficiency percent (EE%), % drug release, and permeation over 24 h of different formulations were determined. The optimal formulation was incorporated into a hydrogel. Finally, the efficacy and tolerability of the optimized RP ethosomal hydrogel were clinically evaluated for acne treatment using a split-face comparative clinical study. RESULTS: The optimized ethosomal RP showed particle size of 195.8±5.45 nm, ZP of -62.1±2.85 mV, EE% of 92.63±4.33%, drug release % of 96.63±6.81%, and drug permeation % of 85.98 ±4.79%. Both the optimized RP ethosomal hydrogel and tretinoin effectively reduced all types of acne lesions (inflammatory, non-inflammatory, and total lesions). However, RP resulted in significantly lower non-inflammatory and total acne lesion count than the marketed tretinoin formulation. Besides, RP-loaded ethosomes showed significantly improved tolerability compared to marketed tretinoin with no or minimal skin irritation symptoms. CONCLUSION: RP ethosomal hydrogel is considerably effective in controlling acne vulgaris with excellent skin tolerability. Therefore, it represents an interesting alternative to conventional marketed tretinoin formulation for topical acne treatment.